Hi, it's Gini, and I'm so excited to share my Scor-Pal/ Heartfelt Creations project with you today. Sometimes a simple structure is best, if you want to add lots of beautiful embellishments. That's why I decided to make a very simple basket, to really show off the gorgeous Heartfelt Creations products.
Take
a 12 x 12 piece of cardstock, and score at 4" and 8". Turn the paper
to the right and score again at 4" and 8". Cut the corner blocks away,
leaving a cross shape. (Leave a 1/2" tab on both sides of the upper and
lower center squares to adhere the sides of the basket together.)
Apply
Scor-tape to the tabs and assemble the basket.
Cut a strip of paper
for the handle, and decorate with Parisian Accents border die cuts. Also
add ribbon to the middle of the handle. Attach handle to the inside of
the basket with the tape. That's it for the basic structure. Easy-peasy.
Next add decorative paper panels to the
inside and outside of the basket. Die cut 4 sets of the Ornate Gateway
dies, and adhere to each of the front panels. Stamp, cut and shape the
Striped Sun Kissed Flowers. Add to the top of the handle. Add pearls
to the center of the flowers and along the border of the handle. Take a
bought oval tag, stamp the sentiment and heat emboss with powder. Stamp
the birdhouse over the sentiment. Ink the edges, and glue a small
flower to the lower corner. Cut two of the Ornate gateway toppers, and
add to the sides of the tag. Finish with ribbon and twine to attach the
tag to the basket.
Scor-Pal Products:
Scor-Pal
Scor-Tape
Heartfelt Creations:
Daphne Paper Collection HCDP1 234
Ornate Gateway Die HCD 737
Sunkissed Fleur Die HCD 734
Spring Season PreCut Set HCPC 3540
Heartfelt Expressions PreCut Set HCPC 3474
Striped Sun Kissed Fleur PreCut Set HCPC 3534
Other:
Spellbinders Parisian Accents
WorldWin Cardstock: Light Pretty Pink ColorMates
May Arts Ribbon: String/Burlap SM-17; Faux Canvas/Lightweight 444-58-20
Want2Scrap Pearls
Wow Embossing Powder - Bark
Wednesday, June 26, 2013
Tuesday, June 25, 2013
Scor-Pal and Heartfelt Creations with Toni Storie
Hello there! It's Toni with my turn to share a Scor-Pal and Heartfelt Creations project. All week, the Scor-Pal design team is hopping with the designers from Heartfelt Creations. You'll want to make sure you see every bit of stunning work that there is to see! For this hop, I created a Surprise Pop Up card*. When you pull up on those ribbon tails, you get a access to two more stamped areas and a message.
For this project, you will need:
- 4 1/4" x 11" piece of card stock
- 4 1/4" x 5 1/2" piece of card stock
- 3 1/4" x 4 3/4" piece of card stock
- 1/2" x 7" piece of copy paper
- Scraps of card stock for dimensional flower
-
Ruler
- Craft Knife
- Ribbon
- Circle punches
- Ink
- Heartfelt Creations dies (Perfect Petals die)
- Additional adhesives (glue dots, foam tape, liquid glue)
- Glitter
Place the 4 1/4" x 11" piece of card stock into your Scor-Pal with the 11" side against the top fence. Score at 5 1/2". Crease the fold and set card base aside.
Stamp the 4 1/4" x 5 1/2" piece of card stock with leaf image from the Beautiful You set. This piece will now become your card front.
Insert your Scor-Mat into your Scor-Pal. Place the 4 1/4" side of your card front against the top fence. Place your ruler at 3/4" (or 3 1/2") and cut vertically from 3/4" to 4 3/4". Turn the card stock 180 degrees and repeat on the opposite side.
Place the 5 1/2" side of the card front against the top fence. Line your ruler up with the 4 3/4" mark and cut vertically from 3/4" to 3 1/2", connecting the two cuts from the last step. This will create a flap that is open at the bottom. (Oops, no pattern here because I forgot to shoot that step and had to go back and re-create the step for you).
Remove the Scor-Mat and place the card front with the 5 1/2" side against the top fence and the cut end of the flap against the left hand side of the Scor-Pal. Score at 1 1/4" and 4 3/4" between the horizontal cut lines.
Turn the card front over and score at 2 1/2'" between the two horizontal cut lines. Crease all of the scores from this step and the last step.
Punch a semi-circle out of the top of the card front. Remember, the bottom of the card front has the cut end of the flap.
Take your 3 1/4" x 4 3/4" piece of card stock and wrap the 1/2" x 7" piece of copy paper around it. Place a small bit of Scor-Tape where the ends overlap. Peel the backing off and secure the ends together. This piece of copy paper will stabilize the sliding part of the card that creates the surprise.
Line the top of the back side of the card front with Scor-Tape and adhere the copy paper stabilizer.
Line the right, left and bottom of the back side of the card front with Scor-Tape. Line the 1/2" section of the very bottom of the folded flap as shown.
Remove the Scor-Tape backing on the 1/2" section of the folded flap. Insert the 3 1/4" x 4 3/4" piece of card stock into the copy paper stabilizer and adhere to the back of the card front.
Remove the Scor-Tape backing from the right, left and bottom sides of the card front and adhere to the card base. Now your card is functional and ready to embellish!
The tag portion of the Surprise Pop Up card has the corner rounded, a hole reinforcer punched and adhered before looping ribbon through the hole. The leaves from Heartfelt Creations Beautiful You were repeated on the tag and a sentiment was stamped in darker ink.
The revealed portion of the Surprise Pop Up card was stamped with the same leaves and two more sentiments from the Heartfelt Creations Beautiful You set.
For the folded front of the Surprise Pop Up card, a dimensional flower was created by stamping with the Heartfelt Creations Lily Petals and then die cutting them out with Heartfelt Creations Perfect Petals dies. Two leaves were created by stamping with the Elegant Single Leaves set and then die cutting them out with the same Perfect Petals die set. Both petals and leaves were sponged with color to accent them. After the petals and leaves were die cut and sponged, one single score line was made down the center and the Scor-Tool was used to round the edges of the petals and leaves. The petals and leaves were adhered into a flower shape with glue dots. Liquid glue was applied to the flower center and then glass glitter was sprinkled over this glue. The whole flower was then adhered onto the bottom half of the folded flap.
Here is the finished product when lying down flap and pulled open.
Here is another view of the card standing upright with the flap closed.
Thanks for having a look all the way through!
Details: Stamps: Beautiful You, Lily Petals, Elegant Single Leaves (Heartfelt Creations); Paper: Pool Party, Barely Banana, Crumb Cake, Very Vanilla; Ink: Crumb Cake, Soft Suede, Barely Banana, So Saffron; Accessories: Scor-Pal, Scor-Mat, Scor-Tape, Scor-Tool, Heartfelt Creations Perfect Petals dies, ruler, craft knife, Pool Party ruffled edge ribbon, circle punches, glue dots, stampin' dimensionals, Crystal Effects, Champagne Glass Glitter.
Labels:
Heartfelt Creations,
Scor-Mat,
Scor-pal,
Scor-tape,
Toni Storie
Scor-Pal and Heartfelt Creations with Katie Tate
Now we all given birthday cards and often flowers too so I decided to use both of those ideas and make a pot of Birthday Flowers!
It is just as great as a card and the flowers are everlasting!
Project Recipe:
Scoring Tool - Scor-Pal
Adhesive - Scor-Tape
Patterned Papers - SEI
Lace - Hobby Lobby
Leaf, Flowerpot and Tag Die and Leaf and Sentiment Stamp - Stamps and Dies by Heartfelt Creations
Buttons - Unknown
Paint - Apple Barrel
Dowel - Walmart
Embossing Enamel - Aged Green by Stampendous
Here you can see the base items to create the flower pot. The leaves were stamped first and then cut with the matching die.
The flower pot is created from 4 die cuts of the pot, 4 strips of cardstock measuring 3 3/4" by 1" scored at 1/2" along the short side. The base of the pot is a square measuring 3 5/8" scored at 1/2" on all sides and the corners snipped as in the photo to create the base.
Add Scor-Tape to the edge to ensure a good adhesion.
Attach the 4 pots together in a row.
Make the base of the pot and add one edge to the bottom of one of the pots as in the photo.
Continue connecting the base to the pots using the bone folder on the inside edges to create crisp and firm corners.
The completed pot should look like this.
Cut flower foam to fit the inside for you to add your flower stems.
For an extra I added embossing enamel to the leaves but this is optional.
To decorate the pot create rosette flowers from strips of punched papers measuring 12" by 1" and 12" by 1 1/2 scored at the scalloped of the punched design. Paint the doweling to make the stems. Cut the doweling into various lengths and attach rosettes with hot glue. Add buttons to the centers of the flowers and add the die cut leaves to the stems.
I finished the decoration with a sentiment stamped onto the two die cut tags.
The recipient will get to enjoy them a lot longer than a regular bunch of flowers.
Katie
Labels:
Heartfelt Creations,
Katie Tate,
Rosettes,
Scor-pal,
Scor-tape,
SEI
Monday, June 24, 2013
Scor-Pal and Heartfelt Creations Week With Abby Henderson
Hi Friends! It's Abby with ScrappinAbby and I have a quick and easy project to share with all of you today using your Scor-pal and some of the wonderful products from Heartfelt Creations.
I made a Notes Wood Wall Hanging....
Products used: Scor-pal Scor-Tape Heartfelt Creations Delicate Asters and Butterflies Pre-Cut Set Spellbinders Les Papillions Die Heartfelt Creations Clear Cardstock
Next I cut out the butterfly image I wanted to use with the clear card stock by using my Cuttlebug
I added some purple glitter glue to the edges of the butterfly and set it aside to dry.
I distressed the edges of my card stock, inked them up and adhered them to the decorative piece of wood using some Scor-Tape.
Next I used some Perfect Medium and some purple embossing powder to stamp and emboss the aster image.
I then stamped my butterfly image by using a mix of Distress Markers in a few different colors.
My butterfly die cut was still drying so I want ahead and adhered my score-marked clear card stock to the wood using the 1/" Scor-Tape.
Once the butterfly was dry, I used more Scor-Tape to adhere it over the stamped image. I simply added some flat back pearls, trims/laces and some flowers to complete the project. I topped it off with some vintage lace.
This would be a great gift idea and you could tuck in a gift card or a sweet note for someone special.
Products used: Scor-pal Scor-Tape Heartfelt Creations Delicate Asters and Butterflies Pre-Cut Set Spellbinders Les Papillions Die Heartfelt Creations Clear Cardstock
I cut a strip of the clear card stock into a 6 x 2 1/2 " strip. I then placed it on my Scor-pal and made a score mark every 1/2"
Next I cut out the butterfly image I wanted to use with the clear card stock by using my Cuttlebug
I added some purple glitter glue to the edges of the butterfly and set it aside to dry.
I distressed the edges of my card stock, inked them up and adhered them to the decorative piece of wood using some Scor-Tape.
Next I used some Perfect Medium and some purple embossing powder to stamp and emboss the aster image.
I then stamped my butterfly image by using a mix of Distress Markers in a few different colors.
My butterfly die cut was still drying so I want ahead and adhered my score-marked clear card stock to the wood using the 1/" Scor-Tape.
Once the butterfly was dry, I used more Scor-Tape to adhere it over the stamped image. I simply added some flat back pearls, trims/laces and some flowers to complete the project. I topped it off with some vintage lace.
This would be a great gift idea and you could tuck in a gift card or a sweet note for someone special.
I hope you enjoyed my tutorial and project today and that I was able to show you another way to create using the Scor-pal & Heartfelt Creations products.
Thanks for stopping by the Scor-pal blog and happy crafting : )
Labels:
Abby Henderson,
Heartfelt Creations,
Scor-pal,
Scor-tape
Subscribe to:
Posts (Atom)

















































